MASK/CLEAR
MASK/CLEAR/TIME
DET/FRONT
GRAVITY/LEXTRA=1.2
GRAVITY/ON
L/WAV 4.6 12.85 0.125/LIN
FIT/TRANS/LOG 4.6 12.85
L/Q .0018, .0003, .01, -.06, 0.1, 0.006, 0.15
L/QXY 0 0.04 .002/lin
!BACK/MON/TIMES 80800 98000
mask h0
mask h190>h191
mask v0
mask v191
! try this box mask for the streak below beam stop
mask h58>h64+v125>v130
!
!mask/time 14876 17124
!mask/time 5000 19200
!
L/R 41 -1 3
!L/SP 1 36864
!MON/LENGTH=17.937 2
MON/DIRECT=DIRECT_RUN524.dat
!MON/FLAT=LOQ$DISK0:[LOQMGR.EFFIC]FLAT_CELL.061
!
! this centre found RKH 28/11/09 11m front at -100, why is x centre so different ???
!  run 2403 gave -308 -228.5 but anisotropic ??  gdw20 run 2407 -310.5 -220.5
!  run 2459 seems more isotropic gave -308.7 -225.2
! 9/4/10 try again, with gravity, run 2459  -308.5, -198.8
set centre -308.7 -198.8 5.1 5.1
!
! 29/11/09 INTERIM fit 2448  4.6-12.85, 11m, A1=12, A2=5  (need detail overlap check yet)
! still need a good centre 
set scales 0.2514 1.0 1.0 1.0 1.0
!
! correction to actual sample position, 81-47 for steam header, zero corr is 81mm before safety shutter
SAMPLE/OFFSET 34.0
! Correction to SANS2D encoders in mm 
DET/CORR REAR X -16.0
DET/CORR REAR Z 58.0
DET/CORR FRONT X -44.0
DET/CORR FRONT Y -20.0
DET/CORR FRONT Z 47.0
DET/CORR FRONT ROT 0.0
DET/CORR/FRONT/RADIUS 1.0
DET/CORR/FRONT/SIDE 1.0
!
!! 29/11/09  Bouchard, front det only, at 11m,   A2=5mm runs, det moved 25mm
!! scale from fit to .0098 to .334, 6% log bin data, using 1/data wts as errors too large
!! beware front det will need its own mask