| 1 | MASK/CLEAR |
|---|
| 2 | MASK/CLEAR/TIME |
|---|
| 3 | DET/FRONT |
|---|
| 4 | GRAVITY/ON |
|---|
| 5 | GRAVITY/LEXTRA=1 |
|---|
| 6 | L/WAV 4.6 12.85 0.125/LIN |
|---|
| 7 | FIT/TRANS/LOG 4.6 12.85 |
|---|
| 8 | L/Q .0018, .0003, .01, -.06, 0.1, 0.006, 0.15 |
|---|
| 9 | L/QXY 0 0.04 .002/lin |
|---|
| 10 | !BACK/MON/TIMES 80800 98000 |
|---|
| 11 | mask h0 |
|---|
| 12 | mask h190>h191 |
|---|
| 13 | mask v0 |
|---|
| 14 | mask v191 |
|---|
| 15 | ! try this box mask for the streak below beam stop |
|---|
| 16 | mask h58>h64+v125>v130 |
|---|
| 17 | ! |
|---|
| 18 | !mask/time 14876 17124 |
|---|
| 19 | !mask/time 5000 19200 |
|---|
| 20 | ! |
|---|
| 21 | L/R 41 -1 3 |
|---|
| 22 | !L/SP 1 36864 |
|---|
| 23 | !MON/LENGTH=17.937 2 |
|---|
| 24 | MON/DIRECT=DIRECT_RUN524.dat |
|---|
| 25 | !MON/FLAT=LOQ$DISK0:[LOQMGR.EFFIC]FLAT_CELL.061 |
|---|
| 26 | ! |
|---|
| 27 | ! this centre found RKH 28/11/09 11m front at -100, why is x centre so different ??? |
|---|
| 28 | ! run 2403 gave -308 -228.5 but anisotropic ?? gdw20 run 2407 -310.5 -220.5 |
|---|
| 29 | ! run 2459 seems more isotropic gave -308.7 -225.2 |
|---|
| 30 | ! 9/4/10 try again, with gravity, run 2459 -308.5, -198.8 |
|---|
| 31 | set centre -308.7 -198.8 5.1 5.1 |
|---|
| 32 | ! |
|---|
| 33 | ! 29/11/09 INTERIM fit 2448 4.6-12.85, 11m, A1=12, A2=5 (need detail overlap check yet) |
|---|
| 34 | ! still need a good centre |
|---|
| 35 | set scales 0.2514 1.0 1.0 1.0 1.0 |
|---|
| 36 | ! |
|---|
| 37 | ! correction to actual sample position, 81-47 for steam header, zero corr is 81mm before safety shutter |
|---|
| 38 | SAMPLE/OFFSET 34.0 |
|---|
| 39 | ! Correction to SANS2D encoders in mm |
|---|
| 40 | DET/CORR REAR X -16.0 |
|---|
| 41 | DET/CORR REAR Z 58.0 |
|---|
| 42 | DET/CORR FRONT X -44.0 |
|---|
| 43 | DET/CORR FRONT Y -20.0 |
|---|
| 44 | DET/CORR FRONT Z 47.0 |
|---|
| 45 | DET/CORR FRONT ROT 0.0 |
|---|
| 46 | DET/CORR/FRONT/RADIUS 1.0 |
|---|
| 47 | DET/CORR/FRONT/SIDE 1.0 |
|---|
| 48 | ! |
|---|
| 49 | !! 29/11/09 Bouchard, front det only, at 11m, A2=5mm runs, det moved 25mm |
|---|
| 50 | !! scale from fit to .0098 to .334, 6% log bin data, using 1/data wts as errors too large |
|---|
| 51 | !! beware front det will need its own mask |
|---|
