Ticket #5060: mask_temp.txt

File mask_temp.txt, 1.8 KB (added by Anders Markvardsen, 9 years ago)

isis sanss User file

Line 
1! LNX test
2MASK/CLEAR
3MASK/CLEAR/TIME
4PRINT chopper phase 99.9, max wav @ 6m is ~16.25
5L/WAV 1.75 16.25 .25/LIN
6PRINT 5% wavebins
7! strong scatter
8L/Q .001 .8 .08/LOG
9!L/Q .003,.001,.013,-.08,1.0
10PRINT change Q bins if have weak scatter
11! weak scatter
12!L/Q 0.0025, 0.001, 0.01, -0.16, 1.0
13L/QXY 0 0.025 .005/lin
14! note increase lower time limit here
15BACK/MON/TIMES 85000 98000
16DET/REAR
17GRAVITY/ON
18! dead wire near top
19!mask h156>h159
20! spot on rhs beam stop at 11m
21!mask h57>h66+v134>v141
22mask h0
23!mask v0
24!mask v134>v141+h57>h66
25!
26mask/time 14500 16000
27!mask/time 5000 19200
28!
29L/R 41 -1 3
30!L/SP 1 36864
31!MON/LENGTH=17.937 2
32!
33!MON/DIRECT=DIRECT_TRY_3.DAT
34MON/DIRECT=DIRECTm1_9672_6m_08Aug11.dat
35MON/TRANS/SPECTRUM=1/INTERPOLATE
36!  set monitor 2 to interpolate
37!PRINT  scale not sorted yet !!
38TRANS/TRANSPEC=4/SHIFT=-500
39MON/SPECTRUM=1/INTERPOLATE
40FIT/TRANS/LOG 1.75 16.25
41! 02/08/11 this centre found from glassy carbon 9673-add, 1.75-16.25ang, gravity on
42set centre -106.4 -169.1
43!
44! 29/05/11 .1358, fit 7400 GDW20 using 1.75 to 16.25 (but first 3 points noisy at 8% bins)
45!  24/7/11 .1374, very similar, from 9356-add, but data is too steep at small Q, need new D-B?
46! 25/07/11 new d-b file using gdw, 0.10327
47! 04/08/11 new db 9673gc_6m_SmoothUnFitTrans_04Aug11, .10055
48! 04/08/11 DIRECTm1_9346_6m_try_26Jul11, fit to 9672, .0626
49! 08/08/11 DIRECT=DIRECTm1_9672_6m_08Aug11, fit 9672, .1005
50set scales 0.1005 1.0 1.0 1.0 1.0
51! correction to actual sample position, measured 28 before shutter, notionally 81mm before shutter
52SAMPLE/OFFSET 53
53! Correction to SANS2D encoders in mm
54DET/CORR/REAR X -16.0
55DET/CORR REAR Z 58.0
56DET/CORR/FRONT/X -44.0
57DET/CORR/FRONT Y -20.0
58DET/CORR/FRONT/Z 47.0
59DET/CORR/FRONT/ROT 0.0
60!
61!! 22/07/11 MASKSANS2D.112C_6m_commissioning SANS Team, REAR (ie ex front) only