Ticket #8245: MASKSANS2D_133R_12m_8mm_XPress_changer.txt

File MASKSANS2D_133R_12m_8mm_XPress_changer.txt, 1.3 KB (added by Gesner Passos, 7 years ago)
Line 
1PRINT for changer
2MASK/CLEAR
3MASK/CLEAR/TIME
4L/WAV 1.5 12.5 0.125/LIN
5
6L/Q .001,.001,.0126,-.08,.2
7!L/Q .001 .8 .08/log
8L/QXY 0 0.05 .001/lin
9BACK/M1 35000 65000
10BACK/M2 85000 98000
11DET/REAR
12GRAVITY/ON
13FIT/TRANS/OFF
14!FIT/TRANS/LOG 1.5 12.5
15mask/rear h0
16mask/rear h190>h191
17mask/rear h167>h172
18mask/rear v0
19mask/rear v191
20mask/front h0
21mask/front h190>h191
22mask/front v0
23mask/front v191
24! dead wire near top
25mask/front h156>h159
26!masking off beamstop arm - 12mm wide @ 19degrees
27!mask/rear/line 12 19
28! spot on rhs beam stop at 11m
29! mask h57>h66+v134>v141
30!
31! mask for Bragg at 12m, 26/03/11, 3 time channels
32mask/time 17500 22000
33!
34L/R 41 -1 3
35!L/Q/RCut 200
36!L/Q/WCut 8.0
37!PRINT REMOVED RCut=200 WCut=8
38!
39MON/TRANS/SPECTRUM=1/INTERPOLATE
40MON/SPECTRUM=1/INTERPOLATE
41TRANS/TRANSPEC=3
42!TRANS/TRANSPEC=4/SHIFT=-70
43!
44set centre 155.1 -169.65 5.1 5.1
45!
46! 25/10/13 centre gc 22021, fit gdw20 22023
47set scales 0.074 1.0 1.0 1.0 1.0
48! correction to actual sample position, notionally 81mm before shutter
49SAMPLE/OFFSET +53.0
50! Correction to SANS2D encoders in mm
51DET/CORR REAR X -16.0
52DET/CORR REAR Z 47.0
53DET/CORR FRONT X -44.0
54DET/CORR FRONT Y -20.0
55DET/CORR FRONT Z 47.0
56DET/CORR FRONT ROT 0.0
57!
58!! 01/10/13 MASKSANS2d_133F M3 by M1 trans Hellsing, Rennie, Jackson, L1=L2=12m A1=20 and A2=8mm