Ticket #8753: mask.txt

File mask.txt, 1.3 KB (added by Gesner Passos, 7 years ago)
Line 
1PRINT for changer
2MASK/CLEAR
3MASK/CLEAR/TIME
4L/WAV 1.5 12.5 0.125/LIN
5
6L/Q .001,.001,.0126,-.08,.2
7!L/Q .001 .8 .08/log
8L/QXY 0 0.05 .001/lin
9BACK/M1 35000 65000
10BACK/M2 85000 98000
11BACK/M3 40000 70000
12BACK/M4 50000 80000
13DET/REAR
14GRAVITY/ON
15!FIT/TRANS/OFF
16FIT/TRANS/LOG 1.5 12.5
17mask/rear h0
18mask/rear h190>h191
19mask/rear h167>h172
20mask/rear v0
21mask/rear v191
22mask/front h0
23mask/front h190>h191
24mask/front v0
25mask/front v191
26! dead wire near top
27mask/front h156>h159
28!masking off beamstop arm - 12mm wide @ 19degrees
29!mask/rear/line 12 19
30! spot on rhs beam stop at 11m
31! mask h57>h66+v134>v141
32!
33! mask for Bragg at 12m, 26/03/11, 3 time channels
34mask/time 17500 22000
35!
36L/R 41 -1 3
37!L/Q/RCut 200
38!L/Q/WCut 8.0
39!PRINT REMOVED RCut=200 WCut=8
40!
41MON/TRANS/SPECTRUM=1/INTERPOLATE
42MON/SPECTRUM=1/INTERPOLATE
43TRANS/TRANSPEC=3
44!TRANS/TRANSPEC=4/SHIFT=-70
45!
46set centre 155.45 -169.6 5.1 5.1
47!
48! 25/10/13 centre gc 22021, fit gdw20 22023
49set scales 0.074 1.0 1.0 1.0 1.0
50! correction to actual sample position, notionally 81mm before shutter
51SAMPLE/OFFSET +53.0
52! Correction to SANS2D encoders in mm
53DET/CORR REAR X -16.0
54DET/CORR REAR Z 47.0
55DET/CORR FRONT X -44.0
56DET/CORR FRONT Y -20.0
57DET/CORR FRONT Z 47.0
58DET/CORR FRONT ROT 0.0
59!
60!! 01/10/13 MASKSANS2d_133F M3 by M1 trans Hellsing, Rennie, Jackson, L1=L2=12m A1=20 and A2=8mm