Ticket #2785: mask_temp.txt

File mask_temp.txt, 1.8 KB (added by Anders Markvardsen, 9 years ago)

user file

Line 
1! LNX test
2MASK/CLEAR
3MASK/CLEAR/TIME
4PRINT chopper phase 99.9, max wav @ 6m is ~16.25
5L/WAV 1.75 16.25 .25/LIN
6PRINT 5% wavebins
7! strong scatter
8L/Q .001 .8 .08/LOG
9!L/Q .003,.001,.013,-.08,1.0
10PRINT change Q bins if have weak scatter
11! weak scatter
12!L/Q 0.0025, 0.001, 0.01, -0.16, 1.0
13L/QXY 0 0.025 .005/lin
14! note increase lower time limit here
15BACK/MON/TIMES 85000 98000
16DET/REAR
17GRAVITY/ON
18! dead wire near top
19!mask h156>h159
20! spot on rhs beam stop at 11m
21!mask h57>h66+v134>v141
22mask v134>v141+h57>h66
23!
24mask/time 14500 16000
25!mask/time 5000 19200
26!
27L/R 41 -1 3
28!L/SP 1 36864
29!MON/LENGTH=17.937 2
30!
31!MON/DIRECT=DIRECT_TRY_3.DAT
32MON/DIRECT=DIRECTm1_9672_6m_08Aug11.dat
33MON/TRANS/SPECTRUM=1/INTERPOLATE
34!  set monitor 2 to interpolate
35!PRINT  scale not sorted yet !!
36TRANS/TRANSPEC=4/SHIFT=-500
37MON/SPECTRUM=1/INTERPOLATE
38FIT/TRANS/LOG 1.75 16.25
39! 02/08/11 this centre found from glassy carbon 9673-add, 1.75-16.25ang, gravity on
40set centre -106.4 -169.1
41!
42! 29/05/11 .1358, fit 7400 GDW20 using 1.75 to 16.25 (but first 3 points noisy at 8% bins)
43!  24/7/11 .1374, very similar, from 9356-add, but data is too steep at small Q, need new D-B?
44! 25/07/11 new d-b file using gdw, 0.10327
45! 04/08/11 new db 9673gc_6m_SmoothUnFitTrans_04Aug11, .10055
46! 04/08/11 DIRECTm1_9346_6m_try_26Jul11, fit to 9672, .0626
47! 08/08/11 DIRECT=DIRECTm1_9672_6m_08Aug11, fit 9672, .1005
48set scales 0.1005 1.0 1.0 1.0 1.0
49! correction to actual sample position, measured 28 before shutter, notionally 81mm before shutter
50SAMPLE/OFFSET 53
51! Correction to SANS2D encoders in mm
52DET/CORR REAR X -16.0
53DET/CORR REAR Z 58.0
54DET/CORR FRONT X -44.0
55DET/CORR FRONT Y -20.0
56DET/CORR FRONT Z 47.0
57DET/CORR FRONT ROT 0.0
58!
59!! 22/07/11 MASKSANS2D.112C_6m_commissioning SANS Team, REAR (ie ex front) only