Ticket #3088: MASKSANS2D_111N_4m_Penfold_to_16p5.txt

File MASKSANS2D_111N_4m_Penfold_to_16p5.txt, 1.5 KB (added by Steve Williams, 9 years ago)

File to go in the User file: box for testing

Line 
1! extension beyond 14 ang,
2MASK/CLEAR
3MASK/CLEAR/TIME
4PRINT chopper phase 99 not 99.9, max wav is ~15.875 not 16.5
5L/WAV 1.75 15.875 0.125/LIN
6! strong scatter
7L/Q .004,.001,.013,-.08,1.0
8PRINT change Q bins if have weak scatter
9! weak scatter
10!L/Q 0.0045, 0.001, 0.01, -0.16, 1.0
11L/QXY 0 0.025 .005/lin
12! note increase lower time limit here
13BACK/MON/TIMES 85000 98000
14DET/REAR
15GRAVITY/ON
16mask h0
17mask h190>h191
18mask v0
19mask v191
20! dead wire near top
21mask h156>h159
22! spot on rhs beam stop at 11m
23! mask h57>h66+v134>v141
24!
25mask/time 13000 15250
26!mask/time 5000 19200
27!
28L/R 41 -1 3
29!L/SP 1 36864
30!MON/LENGTH=17.937 2
31!
32! 6 May direct beam improves overlap (based on polymer std)
33MON/DIRECT=DIRECT_RUN524_4m_06May11.dat
34MON/TRANS/SPECTRUM=2/INTERPOLATE
35!  set monitor 2 to interpolate
36! PRINT  scale not sorted yet !!
37MON/SPECTRUM=2/INTERPOLATE
38FIT/TRANS/LOG 1.75 15.875
39!
40! 25/05/11 this centre found from GDW20  7207, 1.75-16.5ang, gravity on
41set centre -112.5 -171.175
42!
43! 25/05/11 fit 7207 GDW20 using 1.75 to 16.5 (but first 3 points noisy at 8% bins)
44set scales 0.1735 1.0 1.0 1.0 1.0
45! correction to actual sample position, measured 28 before shutter, notionally 81mm before shutter
46SAMPLE/OFFSET -53
47! Correction to SANS2D encoders in mm
48DET/CORR REAR X -16.0
49DET/CORR REAR Z 58.0
50DET/CORR FRONT X -44.0
51DET/CORR FRONT Y -20.0
52DET/CORR FRONT Z 47.0
53DET/CORR FRONT ROT 0.0
54!
55!! 25/05/11 MASKSANS2D.111N_4m_Penfold, REAR (ie ex front) only